Reference Guide

Dell PowerConnect W-Series ArubaOS 6.1 CLI | Reference Guide show gateway health-check | 875
show gateway health-check
show gateway health-check
Description
Display the current status of the gateway health-check feature.
Syntax
No parameters.
Usage Guidelines
The gateway health check feature can only be enabled by Dell Technical Support.
Example
This example below shows that the gateway health-check feature has not been enabled on the controller.
Related Commands
Command History
This command was introduced in ArubaOS 3.4.
Command Information
Command Description Mode
gateway health-check disable Disable the gateway health check Config mode
Platforms Licensing Command Mode
All platforms Base operating system Enable and Config mode on master or local controllers
(host) #show gateway health-check
Gateway health check not enabled