Reference Guide

672 | show ap details Dell PowerConnect W-Series ArubaOS 6.1 CLI | Reference Guide
show ap details
show ap details [advanced]{ap-name <ap-name>|bssid <bssid>|ip-addr <ip-addr>|ip6-addr
<ip6-addr>}
Description
Show detailed provisioning parameters, hardware, and operating information for a specific AP.
Syntax
Examples
The example below shows part of the output for the command show ap details ap-name <ap-name>.
Parameter Description
advanced Include the following additional data in the output of this command:
 switch message counts
 AP group information
 Virtual AP operating information
ap-name <ap-name> Show data for a specific AP by entering the name of the AP for which you want to display
information.
bssid <bssid> Show data for an AP with the specified BSSID. The Basic Service Set Identifier (BSSID) is
usually the AP’s MAC address.
ip-addr <ip-addr> Show data for an AP with the specified IP address.
ip6-addr <ip6-addr> Show data for an AP with the specified IPv6 address.
(host) # show ap details ap-name AP32
AP "AL39" Basic Information
---------------------------
Item Value
---- -----
AP IP Address 10.6.1.206
LMS IP Address 10.6.2.253
Group corp1344
Location Name N/A
Status Up
Up time 4d:12h:47m:32s
AP "AL39" Hardware Information
------------------------------
Item Value
---- -----
AP Type 125
Serial # AD0054972
Wired MAC Address 00:1a:1e:c9:17:38
Radio 0 BSSID 00:1a:1e:11:73:90
Radio 1 BSSID 00:1a:1e:11:73:80
Enet 1 MAC Address 00:1a:1e:c9:17:39
AP "AL39" Operating Information
-------------------------------
Item Value