Reference Guide

352 | localip Dell PowerConnect W-Series ArubaOS 6.1 CLI | Reference Guide
localip
localip <ipaddr>
ipsec <key>
Description
This command configures the IP address and preshared key for the local controller on a master controller.
Syntax
Usage Guidelines
Use this command on a master controller to configure the IP address and preshared key or certificates for
communication with a local controller. On the local controller, use the masterip command to configure the IP
address and preshared key for the master controller.
If your master and local controllers use a pre-shared key for authentication, they will create the IPsec tunnel using
IKEv1.
Example
The following command configures the local controller with a pre-shared key:
(host) (config) #localip 0.0.0.0 ipsec gw1234xyz
Command History
Command introduced in ArubaOS 3.0.
Command Information
Parameter Description
<ipaddr> IP address of the local controller. Use the 0.0.0.0 address to configure a global preshared key
for all inter-controller communications.
ipsec <key> To establish the master-local IPsec tunnel using IKEv1, enter a preshared key between 6-64
characters.
Platform License Command Mode
Available on all platforms Available in the base operating system Config mode on master controllers