Reference Guide

Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide show ap spectrum debug | 678
show ap spectrum debug
show ap spectrum debug {channel-info|channel-quality|classify|classify-fft|device-
details|device-
info|devices-seen} {ap-name <ap-name>}|{ip-addr <ip-addr>} freq-band
{2.4ghz|5ghz}
Description
This command saves spectrum analysis channel information to a file on the spectrum monitor.
Syntax
Usage Guidelines
Use this command under the supervision of your Dell technical support representative to troubleshoot spectrum
analysis issues or errors.
Related Commands
Command History
Introduced in ArubaOS 6.0.
Parameter Description
channel-info Save channel information for later analysis.
channel-quality Save channel quality information for later analysis
classify Save information on classification for later analysis.
classify-fft Save information on classification and FFT data for later analysis.
device-details Save device details for later analysis.
device-info Save device information for later analysis.
devices-seen Save information on devices seen by the spectrum monitor.
ap-name <ap-name> Name of the spectrum monitor for which you want to view spectrum information.
ip-addr <ip-addr> IP address of the spectrum monitor for which you want to view spectrum information.
freq-band 2.4ghz|5ghz Save information for a specific radio type, either 2.4 GHz or 5 GHz.
Command Description Mode
ap spectrum local-override Convert an AP or AM into a spectrum monitor
by adding it to the spectrum local-override list.
Config mode on master or local
controllers
rf dot11a-radio-profile
mode spectrum-mode
Set a 802.11a radio so the device operates as
an spectrum monitor, and can send spectrum
analysis data to a desktop or laptop client.
Config mode on master or local
controllers
rf dot11g-radio-profile
mode spectrum-mode
Set a 802.11g radio so the device operates as
an spectrum monitor, and can send spectrum
analysis data to a desktop or laptop client.
Config mode on master or local
controllers