Reference Guide

Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide rap-wml | 377
rap-wml
rap-wml <server-name> [ageout <period>] [cache {disable|enable}] [db-name <name>]
[ip-addr <ipaddr>] [password <password>] [type {mssql|mysql}] [user <name>]
Description
Use this command to specify the name and attributes of a MySQL or an MSSQL server.
Syntax
Usage Guidelines
Use the show rap-wml cache command to show the cache of all lookups for a database server. Use the show rap-
wml servers command to show the database server state. Use the show rap-wml wired-mac command to show
wired MAC discovered on traffic through the AP.
Example
This example configures a MySQL server and sets up associated rap-wml table attributes.
(host) (config) #rap-wml mysqlserver type mysql ip-addr 10.4.11.10 db-name
automatedtestdatabase user sa password sa
rap-wml table mysqlserver mactest_undelimited mac timestamp-column time 600
rap-wml table mysqlserver mactest_delimited mac delimiter : timestamp-column time 600
This example configures an MSSQL server and sets up associated rap-wml table attributes.
(host) (config) #rap-wml mssqlserver type mssql ip-addr 10.4.11.11 db-name
automatedtestdatabase user sa password sa
rap-wml table mssqlserver mactest_undelimited mac timestamp-column time 600
rap-wml table mssqlserver mactest_delimited mac delimiter : timestamp-column time 600
Command History
This command was introduced in ArubaOS 2.0.
Command Information
Parameter Description Default
ageout (Optional) Specifies the cache ageout period, in seconds. 0
cache (Optional) Enables the cache, or disables the cache. Disabled
db-name (Optional) Specifies the name of the MySQL or MSSQL database. —
ip-addr (Optional) Specifies the IP address of the named MSSQL server. 0.0.0.0
no Negates any configured parameter. —
password (Optional) Specifies the password required for database login. —
type (Optional) Specifies the server type. —
user (Optional) Specifies the user name required for database login. —
Platforms Licensing Command Mode
All platforms Requires the RF Protect license. Config mode on master controllers