Reference Guide

Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide wms-local system | 1234
wms-local system
wms-local system max-threshold <max-threshold>
Description
This command defines local WMS system settings for the maximum number of APs and client stations.
Syntax
Usage Guidelines
Use this command with caution. Increasing the limit will cause an increase in usage in the memory by WMS. In
general, each entry will consume about 500 bytes of memory. If the setting is bumped up by 2000, then it will
cause an increase in WMS memory usage by 1MB
Example
The following command sets the maximum number of APs and stations at 500.
Command History
This command was introduced in ArubaOS 3.3.2.
Command Information
Parameter Description
<max-threshold> Set the max threshold for the total number of APs and Stations. This value can be any 32-bit number.
Platforms Licensing Command Mode
All platforms Base operating system Config mode on master controllers
host) (config)# wms-local system max-threshold 500