Reference Guide

Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide ap system-profile | 119
Usage Guidelines
The AP system profile configures AP administrative operations, such as logging levels.
Example
The following command sets the LMS IP address in an AP system profile:
(host) (config) #ap system-profile local1
lms-ip 10.1.1.240
Command History
Command Information
Release Modification
ArubaOS 3.0 Command introduced
ArubaOS 3.2 Support for additional RTLS servers, remote AP enhancements was introduced
ArubaOS 3.3.2
z Maintenance-mode parameter was introduced.
z Multiple remote AP DHCP server enhancements were introduced.
z Support for RFprotect server and backup server configuration was introduced.
z The mms-rtls-server parameter was deprecated in ArubaOS 3.3.2. To configure the Mobility
Manager server as an RTLS server, see “mobility-manager” on page 356.
ArubaOS 6.0 Added support for the option to set the RF scanning band (am-scan-rf-band)
Platforms Licensing Command Mode
All platforms Base operating system, except for
noted parameters
Config mode on master controllers