Reference Guide

Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide valid-network-oui-profile | 1162
valid-network-oui-profile
valid-network-oui-profile
no
oui <oui>
Description
This command allows you to add a new OUI to the controller
Syntax
Usage Guidelines
This command adds a new OUI to the controller. The new OUI must be entered in a aa:bb:cc format.
Example
The following command adds a new OUI to the controller.
(host) (config) #valid-network-oui-profile
(host) (Valid Equipment OUI profile) #
(host) (Valid Equipment OUI profile) #oui 00:11:22
This should only be used when adding equipment with a new OUI. Are you sure you
want to proceed? [y/n]: y
Command History
Command Information
Parameter Description Range Default
no Negates any configured parameter. — —
oui <oui> The new OUI to be added. Use the aa:bb:cc format to input
the new OUI.
——
Release Modification
ArubaOS 5.0 Command introduced
Platforms Licensing Command Mode
Available on all platforms Base operating system Config mode on master controllers