Reference Guide

Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide show wms system | 1131
show wms system
show wms system
Description
Show the WMS system configuration and system state.
Syntax
No parameters.
Example
This example shows the WMS System Configuration and System State tables.
The output of this command includes the following information:
Command History
This command was introduced in ArubaOS 3.0
Column Description
Max Threshold The maximum number of table entries allowed. If this table displays a zero (0), there is no
configured limit.
NOTE: If a configured maximum limit has reached, the controller will not create new WMS entries
for monitored APs and monitored stations. If new APs are deployed after this limit is reached, those
APs will not be marked as 'valid', which will impair the effectiveness of the Adaptive Radio
Management feature. If there are new Rogue APs in the network, they will not be classified as a
rogue.
Current Threshold Current number of table entries.
Total AP Count Total number of statistics entries for monitored APs in the AP table.
Total STA Count Total number of statistics entries for monitored stations in the Station table.
MAX RB-tree Count Maximum number of entries allowed in the statistics.
Total Tree Count Total number of entries currently in the statistics tree. If this limit has been reached, the controller
will not add entries with the RSSI information for APs, monitored APs and monitored clients that are
seen by them. This can negatively affect the RF Plan application.
Poll Count (Max) Current and maximum poll counts.
(host) #show wms system
System Configuration
--------------------
Key Value
--- -----
max-threshold 30000
System State
-------------
Key Value
--- -----
Max Threshold 30000
Current Threshold 28470
Total AP Count 27153
Total STA Count 3294
MAX RB-tree Count 50000
Total Tree Count 50000
Poll Count (Max) 10(365)