Reference Guide

Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide show wlan ht-ssid-profile | 1101
show wlan ht-ssid-profile
show wlan ht-ssid-profile [<profile>]
Description
Show a list of all High-throughput SSID profiles, or display detailed configuration information for a specific
High-throughput SSID profile.
Syntax
Usage Guidelines
Issue this command without the <profile> parameter to display the entire High-throughput SSID profile list,
including profile status and the number of references to each profile. Include a profile name to display detailed
configuration information for that profile.
Examples
The example below shows that the controller has two configured High-throughput SSID profiles. The References
column lists the number of other profiles with references to the High-throughput SSID profile, and the Profile
Status column indicates whether the profile is predefined. (User-defined profiles will not have an entry in the
Profile Status column.)
The following example shows configuration settings defined for the profile default2.
The output of this command includes the following data columns:
Parameter Description
<profile> Name of a High-throughput SSID profile.
Parameter Description
High throughput enable
(SSID)
Shows if the profile enables or disables high-throughput (802.11n) features.
40 MHz channel usage Shows if the profile enables or disables the use of 40 MHz channels.
(host) #show wlan ht-ssid-profile
High-throughput SSID profile List
---------------------------------
Name References Profile Status
---- ---------- --------------
HT-profile1 16
default2 1
Total:2
(host) #show wlan ht-ssid-profile default
High-throughput SSID profile "default"
--------------------------------------
Parameter Value
--------- -----
High throughput enable (SSID) Enabled
40 MHz channel usage Enabled
MPDU Aggregation Enabled
Max transmitted A-MPDU size 65535 bytes
Max received A-MPDU size 65535 bytes
Min MPDU start spacing 0 usec
Supported MCS set 0-15
Short guard interval in 40 MHz mode Enabled
Legacy stations Allowed
Allow weak encryption Disabled