Reference Guide

1050 | show user Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide
Syntax
Usage Guidelines
Use the show user command to show detailed output (which matches the controller output of user statistics) and
includes the entire output of show user-table, mobility state and statics, authentication statistics, VLAN
assignment method, AP datapath tunnel information, radius accounting statistics, user-role derivation method,
datapath session flow entries and 802.11 association state and statistics.
Parameter Description
authentication-method Authentication method used for the device.
dot1x Number of users to create starting with <ipaddr>.
mac Authentication method.
stateful-dot1x 802.1x authentication.
vpn MAC authentication.
web Stateful 802.1x authentication.
rows <NUMBER> <NUMBER> Displays the log output from the specified number of rows from the end of the log
and the total number of rows to display.
bssid <A:B:C:D:E:F> BSSID address of the device.
essid <STRING> ESSID of the device. If the ESSID includes spaces, you must enclose it in quotation
marks.
internal rows <NUMBER>
<NUMBER>
Displays the log output from the specified number of rows from the end of the log
and the total number of rows to display
ip <A.B.C.D> IP address of user.
location b.f.l Displays the building, floor and location of the device.
mac <A:B:C:D:E:F> MAC address .
mobile Mobile users.
bindings Users that have moved away.
visitors Users that are visitors.
name <STRING> User’s name.
phy-type 801.11 type
a Matches PHY type a.
g Matches PHY type b or g.
role <STRING> User role such as employee, visitor and so on.
rows <NUMBER> <NUMBER> Displays the output from the specified number of rows from the end of the log and
the total number of rows to display
rows <NUMBER> <NUMBER> Displays the output from the specified number of rows from the end of the log and
the total number of rows to display