Reference Guide

Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide show switches | 1038
show switches
show switches [all | state {complete | incomplete | inprogress | required} | summary ]
Description
Displays the details of switches connected to the master controller, including the master controller itself.
Syntax
Example
The output of this command shows that there is a single local controller connected to the master controller.
Command History
Command Information
Parameter Description
all List of all switches.
state Configuration status of all switches.
summary Status of all switches connected to the master.
(host) # show switches all
All Switches
------------
IP Address Name Location Type Version Status Configuration State Config Sync Time (sec)
---------- ---- -------- ---- ------- ------ ------------------- ----------------------
10.16.12.1 r-wing-94 Building1.floor1 master 6.0.0.0_13782 up UPDATE SUCCESSFUL 0
192.0.2.12 CorpA2400 Building1.floor1 master 6.0.0.0_13782 up UPDATE SUCCESSFUL 0
Version Description
ArubaOS 3.0 Command introduced.
ArubaOS 6.0 The version column in the output of this command was expanded to include both the
version and the build number for controllers running ArubaOS 6.0 and later releases.
Platforms Licensing Command Mode
All platforms Base operating system Config or Enable mode on master or local
controllers