Reference Guide

77 | aaa tacacs-accounting Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide
aaa tacacs-accounting
aaa tacacs-accounting server-group <group> [command {action|all|configuration|show}]
[mode {enable|disable}]
Description
This command configures reporting of commands issued on the controller to a TACACS+ server group.
Syntax
Usage Guidelines
You must have previously configured the TACACS+ server and server group (see “aaa authentication-server
tacacs” on page46 and “aaa server-group” on page70).
Example
The following command enables accounting and reporting of configuration commands to the server-group
“tacacs1”:
aaa tacacs-accounting server-group tacacs1 mode enable command configuration
Command History
This command was available in ArubaOS 3.0.
Command Information
Parameter Description Range Default
server-group <group> The TACACS server group to which the reporting is sent. — —
command The types of commands that are reported to the TACACS
server group.
——
action Reports action commands only. — —
all Reports all commands. — —
configuration Reports configuration commands only — —
show Reports show commands only — —
mode Enables accounting for the server group. enable/
disable
disabled
Platforms Licensing Command Mode
All platforms Base operating system Config mode on master controllers