Release Notes

2089 | wlan virtual-ap Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
Parameter Description Range Default
deny-time-range
Specify the name of the time
range for which the AP will
deny access. Time ranges
can be defined using the CLI
command time-range.
— —
dos-prevention
If enabled, APs ignore
deauthentication frames
from clients. This prevents a
successful deauth attack
from being carried out
against the AP. This does not
affect third-party APs.
— disabled
dot11k-profile
Name of an 802.11k profile
to be associated with this
VAP.
— default
dynamic-mcast-optimization
Enable/Disable dynamic
multicast optimization. This
parameter can only be
enabled on a controller with
a PEFNG license.
— disabled
dynamic-mcast-optimization-threshold
Maximum number of high-
throughput stations in a
multicast group beyond
which dynamic multicast
optimization stops.
2-255 stations 6 stations
fdb-update-on-assoc
This parameter enables seam-
less failover for silent clients,
allowing them to re-associate.
If you select this option, the
controller will generate a
Layer 2 update on behalf of
client to update forwarding
tables in bridge devices.
Default: Disabled
— disabled
forward-mode
Controls whether 802.11
frames are tunneled to the
controller using generic
routing encapsulation (GRE),
bridged into the local
Ethernet LAN (for remote
APs), or a combination
thereof depending on the
destination (corporate traffic
goes to the controller, and
Internet access remains
local).
Select one of the following
forward modes:
l Tunnel: When an AP is in
tunnel forwarding mode,
the AP handles all 802.11
association requests and
responses. The AP sends
tunnel
bridge
split-tunnel
decrypt-
tunnel
tunnel