Reference Guide

Dell PowerConnect ArubaOS 5.0 Command Line Interface | Reference Guide show switches | 1099
show switches
show switches [all | state {complete | incomplete | inprogress | required} |
summary ]
Description
Displays the details of switches connected to the master controller including the master controller.
Syntax
Example
The output of this command lists all controllers connected to the master controller including the master
controller.
Command History
This command was available in ArubaOS 3.0
Command Information
Parameter Description
all List of all switches.
state Configuration status of all switches.
summary Status of all switches connected to the master.
Platforms Licensing Command Mode
All platforms Base operating system Config or Enable mode on master or local
controllers
(host) # show switches all
All Switches
------------
IP Address Name Location Type Version Status Configuration State Config Sync Tim
---------- ---- -------- ---- ------- ------ ------------------- ---------------
10.16.12.1 r-wing-94 Building1.floor1 master 3.4.0.0 up UPDATE SUCCESSFUL 0