Reference Guide

Dell PowerConnect ArubaOS 5.0 Command Line Interface | Reference Guide show port xsec | 1007
show port xsec
show port xsec
Description
Displays the list of xSec enabled ports.
Syntax
No parameters.
Example
The output of this command shows the list of xSec enabled ports.
Command History
This command was available in ArubaOS 3.3.2
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Config or Enable mode on master or local
controllers
(host) # #show port xsec
Xsec Ports
----------
Interface xsec vlan state
--------- --------- -----