Deployment Guide

Dell EMC Networking - Deploying VMware vSAN with OS10 Enterprise Edition | version 1.0

B Accessing the RS-232 console port

Note: Before starting, verify that the PC has a 9-pin serial port and that a terminal emulation program is

already installed and running on the PC.

If your PC does not have a DB-9 serial port connection, use a USB-to-Serial adapter.

Dell EMC Networking S4148-ON RS-232 console ports

1. Install the RJ-45 connector side of the provided cable into the S4148-ON console port.

2. Install the DB-9 female side of the provided copper cable into your PC’s serial port (or into other data

terminal equipment [DTE] server hardware that you intend to use).

3. Set the following interface settings:

a. 115200 baud rate, where the Micro USB console port is set to 9600 baud rate

b. No parity

c. 8 data bits

d. 1 stop bit

e. No flow control