Deployment Guide

22
Dell EMC Networking - Deploying VMware vSAN with OS10 Enterprise Edition | version 1.0
v. Repeat step 9.e for each of the remaining hosts in the vSAN cluster.
f. Click Next.
g. On the Analyze impact page, the Overall impact status should indicate No impact.
h. Click Next then Finish.
Note: Deployment examples in this guide only provide instructions for a single leaf switch pair. If deploying
onto a routed leaf-spine, administrators may require separate gateways for vMotion or vSAN traffic. A vSAN
stretched cluster deployment uses static routes to provide separate gateways. Instructions on how to add
static routes can be found within the document Administering VMware vSAN.
To view the Topology page for the VDS:
1. On the web client Home screen, select Networking.
2. In the Navigator pane, select the distributed switch.
3. In the center pane, select Configure > Settings > Topology and click the icon next to VMkernel Ports
to expand. The screen should look similar to Figure 14.
4. Verify each port group is properly configured.
Final topology view for VDS with all port groups, VMkernel adapters, and uplinks configured