Setup Guide

NOTE: By default, the server obtains an IP address using the Dynamic Host Configuration Protocol (DHCP).
4. Select Configure Password from the main menu to change the root password.
The root password manages the server on a one-to-one basis.
5. Select Configure Management Network > IP Configuration > Set static IP address and network configuration to configure a
static IP address.
NOTE: Record the host IP address.
If you purchased the ESXi hypervisor-based vSphere Standard, Enterprise, Enterprise Plus, Essentials Plus software, or Acceleration kits
from Dell EMC, you must have received the Partner Activation Code certificate with the server. To use the ESXi software and receive
subscription services, follow the instructions in your Partner Activation Code certificate that is included with the server.
NOTE: By using the VMware software, you are agreeing to the VMware End User License Agreement (EULA) at
vmware.com/downloads/eula. For more information about license keys and VMware software licensing configuration,
see the VMware documentation at vmware.com/support/pubs.
6 Getting started with VMware vSphere