Deployment Guide

Deployment and configuration
30 VMware vSphere Bitfusion on Dell EMC PowerEdge servers | Deployment guide
Editing the bitfusion-manager service file
9. Use the following commands to first save the file, and then restart the bitfusion-manager service for
the changes to take effect:
sudo systemctl daemon-reload
sudo systemctl restart bitfusion-manager
6.6 Deploy the Open Virtual Appliance (OVA) to create the bitfusion-
server-2 virtual machine
Follow the steps:
1. Select the appliance OVA file, bitfusion-server-2.0.0-11.ova.
2. Select the folder and provide the name for the first appliance bitfusion-server-2.
3. Select the GPU host C4140, review the details and proceed to select the NFS datastore for
appliance storage.
4. Select the port group (mgmt) from the dropdown for the management traffic that connects to
vCenter.
5. Verify the network adapter 1 settings:
• Hostname–bitfusion2
• IPv4 address–100.71.x.x141
• CIDR–21
• MTU–9000
• Gateway–100.71.x.x
• DNS–100.71.x.x
• Search domain–oseadc.local
• NTP–100.71.x.x
6. Verify the network adapter 2 settings:
• IPv4 address–172.16.6.21