Deployment Guide

Deployment and configuration
25 VMware vSphere Bitfusion on Dell EMC PowerEdge servers | Deployment guide
Configure the network adapter 2 settings and select the checkbox
14. Click Next to complete the deployment configuration and wait for the task to complete. Refrain from
powering on the virtual machine.
6.5 Edit the bitfusion-server-1 hardware settings
Follow the steps:
1. Under the Virtual Hardware tab, verify if the number of vCPUs is 8
• Minimum No. of vCPUs = 4x No. of GPU devices attached to the appliance. In this case, 4 x 2 GPUs
i.e. 8
2. Verify if the memory is set to 48GB and select the checkbox Reserve all guest memory.
• Minimum GB of memory = 1.5x aggregate total of GPU memory on all GPU cards passed through. In
this case, 1.5x 32GB i.e. 48GB