Reference Guide

Fully Collapsed vSphere Cluster NSX-T
16 Dell Technologies—VMware Cloud Foundation 4-node JumpStart Solutions Guide
3.1.1.1 Add an Edge Cluster
1. Before you start adding an Edge Cluster, ensure that you select appropriate check boxes to indicate that
you have fulfilled the prerequisites, and then click BEGIN.
2. Enter a cluster name.
3. Enter the MTU value. The recommended value is 9,000.
Enter properties of an Edge Cluster
4. Specify the Autonomous System Number (ASN) of the autonomous system that you want to create (must
be configured as a remote autonomous system on your upstream Border Gateway Protocol (BGP)
router).
5. Name your tier 0 and tier 1 gateways.
6. Set the profile type to Default.
7. Enter the passwords for the different users.
8. Click Next.
9. Select Workload Management. All fields are automatically populated.
10. Click Next.
11. In the Edge Node Details dialog box, enter the following data:
a. Enter the Edge Node FQDN (enter a corresponding DNS entry).
b. Enter the Management IP address and default gateway numbers.