Reference Guide

Fully Collapsed vSphere Cluster NSX-T
15 Dell Technologies—VMware Cloud Foundation 4-node JumpStart Solutions Guide
2. Click the management domain.
Information about the selected management domain is displayed.
3. Expand Actions.
Add an Edge Cluster
4. Click Add Edge Cluster.
This will begin the process to create the Edge Cluster. The process will deploy the cluster as well as
deploying and configuring the edge nodes, transport nodes, and all the connections up to the routed
environment. If you do not use a Border Gateway Protocol (BGP) environment, you will need to create
static routes for all the subnets as the process continues.
To create an Edge Cluster you must have complete information about your BGP environment and DNS
entries. Therefore, it is recommended that you seek assistance from your network administrators in this
task.