Release Notes

Known issues

Topics:

• The UID information for the Dell PowerEdge RAID Controller H310 is displayed incorrectly

•

Operating system takes more time to complete boot when Intel DCPMM is configured in the interleaved app-direct mode

• The health status of the SD cards are not updated under the Hardware Health tab

• Network connectivity is lost when virtual machines configured with Virtual Guest Tagging (VGT) are migrated to another

ESXi host

• The Hardware Health tab of the vCenter Web Client does not display any information when a drive is removed

• Status of the NVMe devices configured as a host cache device is not updated after surprise removal

• The NIC description is incorrect

• FCoE adapter speed is displayed as 0

• vSAN nodes may experience a PSOD during log collection under heavy load

• The vmkernel log displays a warning

• The vmkernel log displays an invalid support message on multiple PCIe devices

• PSOD is not seen in the host when the NMI option is selected in the iDRAC UI

• Auto-negotiation value shown as false though it was set with 100G

• The hardware label for PCIe devices is shown as Not appropriate

• Multiple sfcb core files are generated on ESXi 6.7 U1 host after installing OM and iSM

• Virtual machines report guest data consistency errors after disk extend operation

• SR-IOV functionality is not available for QLogic 41xxx adapter

• iDRAC web interface shows incorrect status with ESXi inbox native driver

• Dell EMC PowerEdge Express Flash NVMe PCIe SSD device is not detected during hot-plug operation

• ESXi OS installed on IDSDM fails to boot when USB 3.0 is enabled

• While logging into OMSA, vSAN cluster experiences Connection Error

• Dell EMC customized VMware ESXi 6.7 A00 installer fails to boot from PXE infrastructure

• PCI devices status is listed as Unknown on vCenter server

• iDRAC does not report the operating system information

• FcoE, iSCSI, RoCE functionality are not available for BCM5741x and QL411xx in ESXi 6.7

• Unsafe shutdowns counter of an NVMe device is incremented for both soft and abrupt shutdowns

The UID information for the Dell PowerEdge RAID

Controller H310 is displayed incorrectly

Description:

The UID information for the Dell PowerEdge RAID Controller H310 is displayed incorrectly as

unknown.vmhba3 when the command localcli storage core adapter list is queried. This

issue is a cosmetic issue and can be ignored.

Applies to: ESXi 6.x

Systems

affected:

All Dell EMC PowerEdge servers that support PERC H310 controller.

Tracking number: 117210

Known issues 9