Release Notes

Tracking number: 100451
PCI devices status is listed as Unknown on vCenter
server
Description: On vCenter Server installed on an ESXi host, the status of some of the devices under Hardware Status
> PCI device is displayed as Unknown.
Applies to: ESXi 6.7.x
Workaround: This issue can be ignored because there is no functionality loss.
Systems
affected:
All Dell EMC PowerEdge servers
Tracking number: 79601 and 87243
iDRAC does not report the operating system
information
Description: PowerEdge servers with VMware ESXi 6.7 installed do not report the operating system information that is
installed in iDRAC.
Applies to: ESXi 6.7.x
Workaround: This is an expected behavior and it is recommended to set it manually by the following steps:
1. Run the command: vmware -vl
The output is: <OS Name> build <OS Version>.
2. Run the command:
esxcli hardware ipmi bmc set -n <OS Name> -v <OS Version>
Systems
affected:
All Dell EMC PowerEdge servers
Tracking number: 59663
FcoE, iSCSI, RoCE functionality are not available for
BCM5741x and QL411xx in ESXi 6.7
Description:
In ESXi 6.7 OS, FcoE, iSCSI and RoCE functionality are not available for BCM5741x and QL411xx family
devices, due to the unavailability of bnxtroce, qedf, scsi-qedil, and qedrntv drivers.
Applies to: ESXi 6.7.x
Workaround: This is an expected behavior with ESXi 6.7 A00 build because these drivers are not available.
Systems
affected:
All Dell EMC PowerEdge servers
Tracking number: 87053
Known issues 17