Release Notes
Table Of Contents
- VMware vSphere 6.7.x on Dell EMC PowerEdge Systems Release Notes
- Contents
- Release summary
- Compatibility
- New and enhanced in VMware vSphere 6.7.x release
- Fixes
- Known issues
- Dell HBA350i MX card is listed as Dell HBA355i MX in Dell EMC PowerEdge MX750c
- The esxcli or localcli commands fail to support receive side scaling (RSS)
- The UID information for the Dell PowerEdge RAID Controller H310 is displayed incorrectly
- Operating system takes more time to complete boot when Intel DCPMM is configured in the interleaved app-direct mode
- The health status of the SD cards are not updated under the Hardware Health tab
- Network connectivity is lost when virtual machines configured with Virtual Guest Tagging (VGT) are migrated to another ESXi host
- The Hardware Health tab of the vCenter Web Client does not display any information when a drive is removed
- Status of the NVMe devices configured as a host cache device is not updated after surprise removal
- The NIC description is incorrect
- FCoE adapter speed is displayed as 0
- vSAN nodes may experience a PSOD during log collection under heavy load
- The vmkernel log displays a warning
- The vmkernel log displays an invalid support message on multiple PCIe devices
- PSOD is not seen in the host when the NMI option is selected in the iDRAC UI
- Auto-negotiation value shown as false though it was set with 100G
- The hardware label for PCIe devices is shown as Not appropriate
- Multiple sfcb core files are generated on ESXi 6.7 U1 host after installing OM and iSM
- Virtual machines report guest data consistency errors after disk extend operation
- SR-IOV functionality is not available for QLogic 41xxx adapter
- iDRAC web interface shows incorrect status with ESXi inbox native driver
- Dell EMC PowerEdge Express Flash NVMe PCIe SSD device is not detected during hot-plug operation
- ESXi OS installed on IDSDM fails to boot when USB 3.0 is enabled
- While logging into OMSA, vSAN cluster experiences Connection Error
- Dell EMC customized VMware ESXi 6.7 A00 installer fails to boot from PXE infrastructure
- PCI devices status is listed as Unknown on vCenter server
- iDRAC does not report the operating system information
- FcoE, iSCSI, RoCE functionality are not available for BCM5741x and QL411xx in ESXi 6.7
- Unsafe shutdowns counter of an NVMe device is incremented for both soft and abrupt shutdowns
- Resources and support
- Contacting Dell EMC
Fixes
The following issue is fixed in ESXi 6.7 U3:
Description: On Dell EMC yx4x PowerEdge R7415 and R6415 servers with AMD processors, hot-add or hot-replace of
NVMe devices did not work at times. A warning message was displayed in the VMkernel log similar to the
following:
WARNING: PCIEHP: 850: 0000:c0:03.4: hotplug slot:0xb7 Inserted adapter
seems broken, or removed (slotStatusPDS: 1). Aborting hot-add operation.
Tracking
Number:
122715
NOTE: The PowerEdge servers are represented using the generic naming convention. To identify the range of server
models, see Identifying the series of your Dell EMC PowerEdge servers.
4
8 Fixes