Release Notes

ManualsBrandsDell ManualsAnalyticsVMware ESXi 6.5.X

Known issues

Topics:

• The UID information for the Dell PowerEdge RAID Controller H310 is displayed incorrectly

•

The health status of the SD cards are not updated under the Hardware Health tab

• Network connectivity is lost when virtual machines configured with Virtual Guest Tagging (VGT) are migrated to another

ESXi host

• The Hardware Health tab of the vCenter Web Client does not display any information when a drive is removed

• Status of the NVMe devices configured as a host cache device is not updated after surprise removal

• The NIC description is incorrect

• FCoE adapter speed is displayed as 0

• The specific NVMe storage device model name is not displayed

• The vmkernel log displays a warning

• The vmkernel log displays an invalid support message on multiple PCIe devices

• PSOD is not seen in the host when the NMI option is selected in the iDRAC UI

• scsi-qla4xxx driver update fails with ESXi 6.0 U3 and ESXi 6.5.x Dell EMC customized images

• Virtual machines report guest data consistency errors after disk extend operation

• iDRAC web interface shows incorrect status with ESXi inbox native driver

• ESXi OS installed on IDSDM fails to boot when USB 3.0 is enabled

• Data integrity issue occurs when deleting virtual disks on ESXi system with PERC9 controller in RAID mode

• qedf driver data integrity may fail at 256 KB block size

• ESXi 6.5 U1 does not display the complete description of USB controller

• Critical issue observed on Dell EMC PowerEdge 14th generation servers with AMD processor and HBA330/12Gbps

controller

• VMkernel logs may display a warning message in VSAN cluster configuration

• Uninstallation of Dell EMC OpenManage VIB fails to delete certain files

• Dell EMC PowerEdge servers with VSAN All-Flash configuration and deduplication enabled reports unrecoverable medium or

checksum error

• ESXi 6.5 with dell-shared-perc8 driver fails to clone VMs simultaneously on a shared datastore

• qlnativefc driver does not load for QLE8262

• snmpd failure message is displayed in the vRealize log insight with snmp enabled

• ESXi OS with Secure boot enabled, the executables does not work on /scratch partition

• PowerEdge 14th generations servers installed with ESXi are configured with default login credentials

• By default, VMFS datastore is disabled on Dell EMC 14th generation PowerEdge Servers with factory-installed VMware

ESXi on BOSS-S1

• Scratch partition stops working after hardware or software iSCSI is enabled on ESXi with elxiscsi Emulex driver

• Virtual machines fail to power on, when system BIOS has MMIO set to 56 TB with supported GPU configured as pass-

through device

• In ESXi host client, physical NICs reports duplicate entries of the speed supported

• Embedded Host Client or vCenter Server reports an error when configuring SR-IOV

• Virtual machines fail to power on, when System BIOS has MMIO set to 56 TB with Network Controllers enabled with NPAR

or NPAREP and SR-IOV

• In ESXi 6.5, xHCI related platform erratum is reported in VMkernel logs

• Hardware Health status reports the raw reading instead of the computed reading of IPMI Sensors

• iDRAC does not report the operating system information

• Operating system reinstallation on top of an existing ESXi installation on a BOSS device fails

• NUMA related warning message is reported in VMkernel logs when Dell Fault Resilient Memory is enabled

• Hardware Health Status tab does not display sensor details

• VMKernel logs may display a warning message

• Hostd log may display warning message

8 Known issues