White Papers

PERC Command Line Interface (CLI) on VMware ESXi
9 Self-Encrypting Drives in Dell EMC PowerEdge servers with VMware vSphere | Technical White Paper |
411
• PERC Storage Card Firmware 50.9.4-3025
• SED Drive Model- SEAGATE (ST2400MM0149)
Listed below are command lines offered in the PERCCLI package that can be used to monitor SED drives
within VMware ESXi:
1. Run PERCCLI by browsing to the following location:
cd /opt/lsi/perccli
2. The following PERCCLI utility screenshot displays information about Encryption Capable Drive and
SED enabled Virtual Disk using the command:
./perccli /c0 show all