White Papers

PERC Command Line Interface (CLI) on VMware ESXi
11 Self-Encrypting Drives in Dell EMC PowerEdge servers with VMware vSphere | Technical White Paper |
411
3. Following screenshot shows that the controller has configured with Local Key Manager making use of
the following command:
./perccli /c0 show all
Controller has been configured with Local Key Manager
4. To create a RAID volume using SED drive for a non-secured VD, use the following command:
./perccli /c0 add vd r0 drives=64:2
RAID volume using SED drive for a non-secured VD created
5. To encrypt the non-secured virtual disk using the following command:
./perccli /c0/d1 set security=on
Here, d1 stands for DiskGroup 1.
Note: Physical drive should have the SED capable feature