User guide

April 2008 20 Dell Inc.
Issue
Version
Description
Resolution
OpenManage
webpage reports
outdated driver
for SAS 6/iR
Adapter
OM 5.3,
OM 5.4 on
ESX 3.0.2
Update 1 and
ESX 3.5
Under Storage
Controller’s
Firmware/Driver
Information section,
OpenManage web
page displays current
driver version as
2.06.48 for SAS 6/iR
Integrated and the
minimum required
driver version as
4.00.00.
The 2.06.48 driver is the correct driver version for
ESX 3.0.2 Update 1 and ESX 3.5. The minimum
required driver version communicated by OM is
for Linux distributions. This message may be
safely ignored.
Mouse does not
work when using
console redirect
feature in DRAC 5
on PE6950
OM 5.x
on ESX 3.x
During and after ESX
Server installation on
PE6950, the mouse
does not work when
using console redirect
feature in DRAC 5.
This issue will be fixed in a future release of ESX
server software. To install ESX using remote
console, use text mode or tab key to select install
options.
DRAC III CLI not
available on
PE6650
OM 5.2 on
ESX 3.0.2
Executing omreport
chassis
remoteaccess
command in CLI
results in “Error!
Hardware or Feature
not present.”
This is a known issue. It does not affect the
normal working of DRAC on PE6650.
Remote Access
tab is not
available in OMSA
web interface on
PE6650
OM 5.2 on
ESX
2.5.5/3.0.1
“Remote Access” tab
in OpenManage
webpage not
populated in “Main
System Chassis”
section of OMSA web
interface.
When tried to execute
omreport chassis
remoteaccess
command from
Service Console, it
throws up an error
“Error! Hardware or
feature not present”
This is a known issue. To use Remote Access
use the DRAC web interface.
DRAC III Service
failure on PE6650
OM 5.2 on
ESX 3.x and
OM 4.5 on
ESX 2.5.x
After installation of
OpenManage on
PE6650, racXvnc and
racsrvc services are
reported as stopped.
This is a known issue. It does not affect the
normal working of DRAC on PE6650.