Tutorial

Tutorial 5: Reports 111
Adding an Iterator for a Multi-Page Report
8 Select the header and click the Move Up ( ) button to place the
component as the second view, in between Header: Icon, Report Title, Time
Range T5 and Hosts Table - For Given Hosts.
9 Click Save on the bar containing the tabs to save Hosts Summary Report T5.
Test the report
Test the report by clicking the Test PDF ( ) button on Host Summary Report
T5’s menu bar. You should see a page with a header, a footer, and a table of host
statistics. A resized sample is shown in the figure below.
Figure 3
Adding an Iterator for a Multi-Page Report
The Iterator component was built to address a need for creating similar views, such as a
report containing detailed information for each host
To define an Iterator component:
1 Choose Configuration> Definitions and ensure that your tutorial module is
selected. Also ensure that the Views tab is selected for the Module Contents pane.
2 Click the Add ( ) button.
The New View dialog appears.
3 Expand the Containers node.
4 Ensure that Blank view is selected and choose Iterator from the drop-down list,
which contains all the available view components. Click OK.
5 Fill in the General tab using the information in the figure: