Reference Guide

vConverter v4.1 Chapter 3 Configuration 90
If these files are not found, vConverter will not be able to complete a conversion if it is
the first of this OS type. If this OS type has been converted previously, the files have
been cached and vConverter will not need to capture them from the source. There are two
workaround options that will allow you to continue.
1. Access Setup Files Location through Tools→Preferences→Conversion.
2. To use the Setup Files Location feature, do one of the following:
• Insert the %windir%\Driver Cache from another server, which is accessible from
the workstation where vConverter is running (e.g., 183H\\server\c$\windows\Driver
Cache\i386)
OR
• Enter the location where the files are extracted and located centrally.
Note: vConverter Cache contains the files required to convert a system. If you want to
convert a Windows 2000 Server SP4 but the required files are missing, vConverter will
use the files from the cache, which is located at C:\Documents and
Settings\<profile>\Local Settings\Application Data\Vizioncore\vConverter\Cache.
114BPrepare Setup Folder for Windows NT SP6a
To prevent unwanted conversion failures due to missing setup folder files, you can
provide a location for all setup folders using the Program Preferences dialog. To prepare
for converting Windows XP SP2:
• Add a new record into this grid.
• Specify OS and SP.
• Then, point to location of the raw SP2 files, or installation of Windows XP with
applied SP2 (\i386 folder).