Reference Guide

vConverter v4.1 Chapter 3 Configuration 88
68BUse P2V to RDM
Before you begin this process, confirm that the devices are available on the target and
that they are not being used by another VM. This feature is not accessible if an RDM is
not available.
1. In the Conversion Tasks pane, click Browse.
2. Click to select a location where the mapping file can be stored. Then, select Use
RDM.
3. Select a radio button—physical or virtual.
Note: Physical mode allows the VM to access the device directly. Virtual allows
you to enjoy the benefits of the .VMDK file (such as snapshots) on the mapped
device.
4. From the dropdown, select a device. Click OK.