Reference Guide

vConverter v4.1 Chapter 3 Configuration 64
24. Navigate down to Use DHCP. Press the spacebar to deselect it. The Static IP,
Netmask, and Default gateway IP options will enable.
25. In the Static IP field, enter an IP address.
26. In the Netmask field, enter the subnet mask for this IP address.
27. In the Default gateway IP field, enter the IP of the default gateway.
28. Navigate down to OK and click Enter.
29. On the Select A Device dialog, use the tab key to select Quit. Then, click Enter.
30. Restart the VM. The settings will take effect.