Reference Guide

vConverter v4.1 Chapter 6 Appendix 179
14BTroubleshooting
This section contains some suggestions for addressing issues that you might encounter
while using vConverter.
97BServer IP Address Can’t Be Resolved
If you have not added a DNS entry to correspond to the IP address that you intend to use
in vConverter, a message will display when you attempt to install an ESX Server.
Set DNS Servers
1. To set the DNS entry, access Control Panel→Network Connections.
2. Right-click the LAN you are using and select Properties.
3. From the list of items that this connection uses, click to highlight IP Protocol
(TCP/IP) and click Properties.
4. Confirm that the Use the following DNS server addresses radio button
is selected.