Reference Guide

vConverter v4.1 Chapter 5 Using vConverter CLI 175
%229
..
%992
%996
%1000
s24
%1000
s30
s31
%1000
s34
%900
%1000
s32
%1000
s34
s35
s40
%0
%500
%1000
>
A conversion result is not displayed in brief mode. The caller application has to analyze
the exit code of the CLI Tool. If a step is reported as started, but there is no percentage
message for the step, and the next step is started immediately, then the prior step passed.
A next progress indicator message is displayed only when the progress value was actually
changed. The default refresh rate value is 100ms; this value may be changed from the
command line.