Reference Guide

vConverter v4.1 Chapter 5 Using vConverter CLI 168
Options Required Description
Output to
Windows
shared
folders
Output
to ESX
Server
/setup <path>
- -
Specifies the path to Windows setup files.
Used when not all files necessary for kernel
migration are found on source—for instance,
when the source was optimized before and
the system file cache was cleaned up
manually or using a program.
If there is more than one operational system
to migrate, and it is necessary to specify
different setup folder locations for each, use
volsetup instead.
/volsetup <volume> <path>
- -
Indicates the path to Windows setup files for
the specified source volume. The meaning is
the same as for setup parameter.
/mcache <path> - - Specifies the path to store and retrieve
Migration Cache, which is used to speed up
the subsequent conversions of the same
system or systems with the same OS and SP
installed. In this case, the following kernel
migrations can use the files used by the first
migration, and do not scan Setup Folder
again, which may take a significant amount
of time.
/vo - - Turns on verbose (human readable) output
mode. By default, brief output format is
used. Can be useful for testing purposes.
/rr <interval in
milliseconds>
- - Refresh rate interval between two progress
indicator messages (see below).
/log <filename> - - Explicitly specifies the file name for the brief
log written by the tool itself. If this
parameter is not specified, the log is stored in
the same folder where the tool is located and
named with the same name as the tool and
.log extension.
/extlogs <folder> - - Specifies the folder path where detailed log
files from the tools must be put. If the
parameter is not specified, all original
vConverter tools logs are purged. If this