Reference Guide

vConverter v4.1 Chapter 4 Using vConverter 151
8. On the Step 4 dialog, the Create Virtual Machine checkbox is already selected if
you are converting directly to an ESX Server.
If you intend to resize any volumes, the Create Flat Disk Image (Non Growable)
checkbox will be selected and disabled. If it is not, select it.
To configure the VM, click Configure VM. On the VM Options dialog, you can
define the RAM for the VM and create floppy and CD/DVD drives. Click OK or
configure up to four NICs.
Each NIC can be configured to individual virtual switches; connected or
disconnected at power on; and have separate IP addresses. To adjust IP settings,
click Change IP on any tab. Make updates on the IP Settings dialog and click
OK. Then, click OK on the VM Options dialog.