Reference Guide

vConverter v4.1 Chapter 4 Using vConverter 143
9. If you want to base this job on an existing task profile, select it from the Use
Profile for Conversion dropdown. Click Apply.
10. Click Save.
Non-Automated RCC
When you add a source system for Non-Automated RCC (by boot CD or by PXE), it will
display in the tree of the Network Browser pane under a branch called Cold cloning ready
after you reboot. You must select the source and target from this list of servers. Also, you
must select Manual or Single Conversion as the conversion type.
11. From the Cold cloning ready (under VistaPE) list in the Network Browser pane,
drag a source to the source server hotspot.
12. Select a volume from the Source Drives list.
13. Select a value from the Virtual Machine type dropdown.
14. Select a Transfer Mode—Block-Based or File-Based.
15. Select either Manual or Single Conversion from the Conversion type dropdown.
Adjacent to the Conversion type field, a dropdown and spin box display—the Run
At field.
16. Select a date from the dropdown and a time from the spinbox.
17. From the Target dropdown, select a value.