Reference Guide

vConverter v4.1 Chapter 4 Using vConverter 142
17. After the conversion is successful, click Close.
84BRCC Conversion Type
There are two ways to complete RCC—one is automated; the other is not. Both processes
are described below.
Automated RCC
1. From the Systems to Convert tab, drag a source to the source server hotspot.
Note: Automated RCC requires at least 300MB of free space on the system
volume of each Source system.
2. Select a volume from the Source Drives list.
3. Select a value from the Virtual Machine type dropdown.
4. Select a Transfer Mode—Block-Based or File-Based.
5. Select Remote Cold Cloning from the Conversion type dropdown.
Adjacent to the Conversion type field, a dropdown and spin box display—the Run
At field.
6. Select a date from the dropdown and a time from the spinbox.
7. From the Target dropdown, select a value.
8. Enter a path in the Target Folder field or click Browse to locate a folder. Select it
and click OK.
Note: If you select a folder that begins or ends with a whitespace, an error
message will display.