Reference Guide

vConverter v4.1 Chapter 4 Using vConverter 128
75BServer Information Area
This area at the bottom of the vConverter window displays statistics about the source
system currently selected in the Network Browser pane. The data displayed in this area is
captured and refreshed by WMI, which requires TCP port 135 to be available. If no data
displays in the Server Information area, this means that either no credentials have been
associated with the source or WMI is not accessible.
If WMI is available on the source and enabled through the network and Active Directory
security policies, a view similar to this will display:
If WMI is not available on the source or has been disabled through the network or Active
Directory, a view similar to this will display:
76BExport Settings
Use this feature to export previously configured vConverter settings and make these
configurations available for other installations. This is the general process:
1. Configure vConverter by setting it up for ESX Server and/or Xen. Create task and
user profiles.