Deployment Guide

100 vFoglight
Installation and Setup Guide
A new step (named Enter the URL data to add ) appears. In addition, the URL
prompt appears.
The step
Enter the URL data to add provides information about the parameters
available for adding a new URL. See also “Configuring vFoglight Management
Server URLs from the Command Line” on page 101 for information about these
parameters.
a At the URL prompt, type the URL parameters as a comma-separated list of
name-value pairs starting with the required
url parameter. For example:
url=http://localhost:8080,address=127.0.0.1,proxy=http://proxy.server
b Once you have typed the desired parameters, press Enter .
A message appears when the URL is added. You then return to the Configure
vFMS URLs menu and prompt.
9 Repeat step 8 and its sub-steps for each Management Server URL you want to
add.
10 To list the URLs you have added, type 1 and press Enter .
A numbered list of configured Management Server URLs appears.
A URL for which the connection has not been tested appears with an exclamation
point (
! ) next to it.
You then return to the Configure vFMS URLs menu and prompt.
11 Once you have specified one vFoglight Management Server, you can test the
vFoglight Agent Manager-vFoglight Management Server connection(s):
a Type 2 and press Enter .
The installer tests the connection(s). A message appears informing you of the
test progress.
When the test is complete, you return to the Configure vFMS URLs menu and
prompt.
b To see whether the URL(s) passed the connectivity test, type 1 and press Enter .
A URL that failed the connectivity test appears with an
x next to it.
You then return to the Configure vFMS URLs menu and prompt.
12 Once you have specified one vFoglight Management Server to which the
vFoglight Agent Manager connects, you can search for other Management
Servers that have been configured to be part of the same HA (High Availability)
partition: