Install Guide

Configure Hyper-V hosts to access SC Series arrays with SAS FE ports
18 Dell EMC SC Series Storage with SAS Front-end Support for Microsoft Hyper-V | 3026-CD-WS | V3
1. While observing safe electrostatic discharge (ESD) precautions, power off the Windows host server
and install a supported SAS HBA PCIe card into an available full or half-height PCIe slot. In this
example, a Dell 12Gb SAS HBA is installed in a full-height PCIe slot in a Dell PowerEdge R630 (13G)
server.
2. Power on the Windows host and press F10 at boot to access the Dell Server Lifecycle Controller
(LC). Use the LC to verify and update the firmware version (preferred method). Optionally, boot into
Windows and follow the steps in the Dell PowerEdge Controller 9 HBA User’s Guide to update the
SAS HBA Windows driver and firmware.
Dell server Lifecycle Controller