Install Guide

38 Citrix XenServer with Dell SC Series Storage Configuration and Deployment | 3132-CD-V
5.2 Connect to SC Series iSCSI control ports
The next step is to establish a target from XenServer so that it registers with the SC Series storage.
1. From the main interactive qaucli menu, select option 4 (Port Level Info & Operations).
2. From the Port Level Info & Operations menu, select option 7 (Target Level Info & Operations).
3. On the HBA target menu screen, select option 6 (Add a Target).
a. Press [Enter] until reaching the TGT_TargetIPAddress option.
b. Enter the target IP address of the SC Series iSCSI control ports, and repeat for each target. In
this example, 10.10.10.100 and 10.20.10.100 are used, which are the iSCSI control ports on the
SC Series storage.
c. Once all targets are entered for HBA 0, select option 9 to the save the port information.
d. Select option 10 to select the second HBA port.
4. Enter option 12 to exit. Enter YES to save the changes.
5. Exit out of the qaucli utility.