Install Guide

19 Citrix XenServer with Dell SC Series Storage Configuration and Deployment | 3132-CD-V
2. Click Add IP address, enter the desired name, select the Network from the drop-down box, and
enter the IP address settings for the dedicated iSCSI storage NIC. Click OK.
3. Repeat steps 1-2 for each additional NIC dedicated for iSCSI storage.
4.2.3 Assign NIC functions using the XE CLI
If NIC functions were assigned using the XenCenter GUI in section 4.2.2, please skip to section 4.2.4 to
configure the server objects in Dell Storage Manager. Be sure Multipathing has been enabled as shown in
section 3.4.1.
4.2.3.1 Optional steps: implementing Jumbo Frames
1. Get the PIF UUID for the interface:
• For a standalone XenServer host: Execute xe pif-list to list the PIFs on the server.
• If the XenServer host is part of a pool:
a. Execute xe host-list to retrieve a list of the hosts and UUIDs.
b. Execute xe pif-list host-uuid=host-uuid to list the PIFs on the selected host.
2. Set the MTU parameter to 9000 (default value is 1500):