User`s guide

Network Setup Options
You can configure your network setup options by selecting Network Setup from the Setup menu.
Defaults Menu
From this menu: You can:
Photo Print Size Specify the size of your photo.
Set Defaults Specify which settings to use for your printer.
Use Current
Use Factory
Network Setup Menu
From this menu: You can:
Print Setup Page Print a list of wireless network settings.
Wi-Fi Protected Setup Specify which type of configuration to use for Wi-Fi protection.
Push Button
PIN
Automatic
NOTE: The Wi-Fi Protected Setup menu is accessible only when the active connection is
Wireless.
Wireless Information View your wireless setup options.
Network Name
Wireless Signal Quality
TCP/IP Menu Configure TCP/IP setup options.
Enable DHCP
If DHCP is disabled, these items appear on the display:
Set IP Address
Set IP Netmask
Set IP Gateway
If DHCP is enabled, these items appear on the display:
View IP Address
View IP Netmask
View IP Gateway
Network Time Allow your printer to update its internal clock according to the time server of your network.
*Enabled
Disabled
Active Network Specify which type of network to use.
*Auto
Ethernet 10/100
Wireless 802.11b/g
Reset Network Adapter
Defaults
Clears or retains all wireless network settings.
No
Yes
Downloaded from ManualsPrinter.com Manuals