User`s guide

Device Setup Options
You can reconfigure your operator panel settings by selecting Device Setup from the Setup menu.
Defaults Options
You can specify your operator panel default settings by selecting Defaults from the Setup menu.
*Factory default setting/Current setting selected by user
For more information, see Defaults Options.
Network Setup Specify your network settings.
Print Setup Page
Wi-Fi Protected Setup
Wireless Information
TCP/IP Menu
Network Time
Active Network
Reset Network Adapter Defaults
For more information, see Network Setup Options
.
Device Setup Menu
From this menu: You can:
*Factory default setting/Current setting selected by user
Language Specify your language options.
Country Specify your country options.
Date/Time Enter your current date and time.
Host Fax Settings Specify if you want to allow the printer fax settings to be reconfigured from the Printer Setup Utility
software.
*Allow
Block
Button Beep Specify if you want to hear a beep when you press buttons on the operator panel.
*On
Off
Power Save Specify how much time you want to elapse before the printer switches to Power Save mode.
Now
After 10 Min
After 30 Min
*After 60 Min
After 120 Min
After 240 Min
Clear Settings
Timeout
Select how much time you want to elapse before the settings list is reset to the defaults.
*After 2 Min
Never
2-Sided Dry Time Specify the amount of duplex dry time before a document is automatically loaded back into the
duplex unit.
*Normal
Extended
Downloaded from ManualsPrinter.com Manuals