User`s guide

Setup Mode

*Factory default settings/Current settings selected by user

Pass Key Specify a pass key. Any external Bluetooth-enabled device needs to enter this pass key before it sends a

print job.

NOTE: You need to specify a pass key if the Security Level is set to High.

Clear Device

List

Removes the names of devices listed. Press the Select button

to clear the Device List. A confirmation

message displays before the list is cleared.

NOTE: This submenu is available only if the Security Level is set to High.

NOTE: Your printer stores a maximum of eight external Bluetooth-enabled devices. When the printer

detects more than eight devices , the least used device is removed from the list.

Main Menu Mode Main Menu Mode Submenu Mode Submenu

Setup Paper Setup Paper Size

Paper Type

Device Setup Language

Country

Date/Time

Host Fax Settings

Button Beep

Power Save

Clear Settings Timeout

2-Sided Dry Time

Defaults Photo Print Size

Set Defaults

Network Setup Print Setup Page

Wi-Fi Protected Setup Push Button

Automatic

Wireless Information Network Name

Wireless Signal Quality

TCP/IP Menu Enable DHCP

View IP Address

View IP Netmask

View IP Gateway

Network Time *Enabled

Disabled

Active Network *Auto

Ethernet 10/100

Wireless 802.11 b/g

Downloaded from ManualsPrinter.com Manuals