User`s guide

14. Click Push Button on your router WPS page within two minutes. Wait for configuration to complete.
If setup is successful
Wi-Fi Protected Setup Successful appears on the printer operator panel.
Check if the printer's Wi-Fi LED turns blue. For more information, see Wi-Fi LED
. Continue with step 15.
If setup is unsuccessful or times out
Wait for a few minutes, and then perform step 9
to step 14 again.
15. Close the router WPS page.
16. Follow the instructions on the installation screen to complete setup.
Using the Wi-Fi Protected Setup Physical Push Button on the Router
1. If you are using your printer with a new Dell computer: Connect the USB cable between the port on the back of the
printer and the port on the back of the computer. Go to step 6
.
If you are using your printer with an existing computer: Go to the next step.
2. Ensure that your computer is on, and then insert the Drivers and Utilities CD.
3. From the Welcome screen, click Next.
4. Select I Agree to the terms of this license agreement, and then click Next.
5. From the Install Additional Software or Software Already Installed screen, click Next.
Downloaded from ManualsPrinter.com Manuals