Users Guide

Installationdetouteslesmisesàjourapplicables
PourinstallertouteslesmisesàjourduBIOSetdemicrologicielapplicablessurvotresystème,exécutezlacommandesuivante:
update_firmware --yes
Unefoislespériphériquesmisàjour,lemessage"ExecutionSuccess"(«Succèsdel'exécution») s'affiche.
Voiciunexempledesortie:
root@localhost ~]# update_firmware --yes
Running system inventory...
Searching storage directory for available BIOS updates...
Checking BIOS - a07
Available: dell_dup_componentid_00159 - a07
Did not find a newer package to install that meets all installation checks.
Checking Primary Backplane - 1.00
Available: dell_dup_componentid_03967 - 1.00
Did not find a newer package to install that meets all installation checks.
Checking System BIOS for PowerEdge 2850 - A07
Did not find a newer package to install that meets all installation checks.
Checking PowerEdge Expandable RAID Controller 4e/Di Firmware - 5b2d
Available: pci_firmware(ven_0x1028_dev_0x0013_subven_0x1028_subdev_0x016d) - 5b2d
Did not find a newer package to install that meets all installation checks.
Checking PERC 5/E Adapter Controller 0 Firmware - 5.2.1-0066
Available: pci_firmware(ven_0x1028_dev_0x0015_subven_0x1028_subdev_0x1f01) - 5.2.2-0076
Found Update: pci_firmware(ven_0x1028_dev_0x0015_subven_0x1028_subdev_0x1f01) - 5.2.2-0076
Checking BMC - 1.83
Available: dell_dup_componentid_05814 - 1.83
Did not find a newer package to install that meets all installation checks.
Checking Dell Remote Access Controller 4/I Firmware - 1.75
Available: pci_firmware(ven_0x1028_dev_0x0012_subven_0x1028_subdev_0x0012) - 1.75
Did not find a newer package to install that meets all installation checks.
Found firmware which needs to be updated.
Running updates...
100% Installing pci_firmware(ven_0x1028_dev_0x0015_subven_0x1028_subdev_0x1f01) - 5.2.2-0076
Done: Execution Success!
[root@localhost ~]#

MiseàjourduBIOSetdumicrologicielvial'interfaceutilisateurgraphique(GUI)
Pourlancerl'interfaceutilisateurgraphiqueinteractive,exécutezlacommandesuivante:
inventory_firmware_gui
LafenêtreInventorieretmettreàjourlesmicrologicielsaffichelesversionsexistantesdescomposantsdevotresystèmeetlesversionsdecomposants
disponibles en vue l'installation.
PourmettreàjourleBIOSetlesmicrologicielsprésentssurvotresystèmeverslesversionsdisponiblesdansl'espacedestockage:

1. SélectionnezlespériphériquesrequisàmettreàjouretcliquezsurMettreàjourlesmicrologiciels.LaboîtededialogueMettreàjourles
micrologiciels s'affiche.
